ExxonMobil ExxonMobil™ LDPE LD 165BW1 Low Density Polyethylene Resin

Film Properties	Typical Value	Unit	Test Based On
Tensile Strength at Yield MD	1800	psi	ASTM D882
Tensile Strength at Yield TD	1700	psi	ASTM D882
Tensile Strength at Break MD	2900	psi	ASTM D882
Tensile Strength at Break TD	2500	psi	ASTM D882
Elongation at Break MD	280	%	ASTM D882
Elongation at Break TD	540	%	ASTM D882
Secant Modulus MD - 1% Secant	33000	psi	ASTM D882
Secant Modulus TD - 1% Secant	41000	psi	ASTM D882
Dart Drop Impact	490	g	ASTM D1709A
Elmendorf Tear Strength MD	260	g	ASTM D1922
Elmendorf Tear Strength TD	460	g	ASTM D1922

Optical Properties	Typical Value	Unit	Test Based On
Gloss (45°)	45		ASTM D2457
Haze	15	%	ASTM D1003

For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs

Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA

Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633

Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.

Resin Properties	Typical Value	Unit	Test Based On
Density	0.922	g/cm³	ASTM D1505
Melt Index² (190°C/2.16 kg)	0.33	g/10 min	ASTM D1238
Peak Melting Temperature	229	°F	ExxonMobil Method

Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.

Processing Statement
The test specimen were prepared on LD 165BW1, 150µm (5.9 mil) thick film, using a 200 mm (7.9 in) die, die gap of 1.0 mm (39.4 mil), Blow-Up Ratio of 1.5 and temperature profile of 145 - 190°C (293 - 374°F).

ExxonMobil™ LDPE LD 165BW1	Units
Low Density Polyethylene Resin